Tharo PA1200FA
Mod.# PA1200FA
For specialty applications requiring the front of a product to be labeled. The PA1200fa is accurate and cost effective. Used to apply a label to the front of a product where the orientation of the product cannot be changed due to product line constraints.
Applicator Features:
• EASY TO USE
The Tharo PA1200 Printer/Applicator is easy to use, with minimal adjustments necessary and quick setup and changeover for applying labels to either the top or side of the product.
• FAST
The PA1200 is quick and accurate, applying up to 60 labels per minute, depending on label size, printer used, and height of the products. A switching device, such as a foot switch, optical sensor or PLC (Programmable Logic Controller) can be connected to the applicator’s PLC port to initiate the print and apply cycle. LEDs provide visual operating status and error conditions.
• HIGH COMPATIBILITY
By allowing for height, width, and depth adjustments, the compact PA1200 is specifically designed to be universally compatible with nearly any thermal transfer/direct thermal label printer.
• COST-EFFECTIVE
With minimal training, quick integration and increased personal productivity, the PA1200 provides a rapid return on investment.
• CONTROLLED CONTACT
The use of springs and an adjustable pressure sensing switch on the tamp pad allows for very precise label placement and controlled contact.
• EASY TO SERVICE
The small amount of moving parts, combined with the best technical support in the industry, makes maintaining and servicing the PA1200 quick and easy.
• TREMENDOUS ACCURACY
The PA1200 is capable of label placement accuracy within 0.01" for stationary products, or 0.125" for moving products.
Printer Specifications :
Minimum Label Size: |
3" x 1 " (76.2mm x 25.4mm) |
Maximum Label Size: |
4.5" x 8.0" (114mm x 203mm) |
Placement Accuracy: |
Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications) |
Speed: |
Up to 20 products per minute* |
Weight of Applicator: |
37lbs (17kg) |
Weight of Stand: |
120lbs (55kg) |
Swing Length: |
26" (660.4mm) |
Air Requirement: |
75 to 90 psi (5 to 6 bar) |
Printer Type: |
Tharo H-Series Direct Thermal or Thermal Transfer Printer |
Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
Environmental: |
Temp 50-95°F (10-35°C) at 10-85% humidity |
Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
* Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput |
|
Order or more info - Contact Us!
or, Call Now! 1-877-522-3539